Folding Pop-Up Camper Cover Installation Guide

This guide provides detailed instructions on how to install, remove, and care for your Folding Pop-Up Camper Trailer cover. It includes a pre-installation checklist, step-by-step instructions, cleaning guidance, and answers to frequently asked questions. Contents

1. Package Contents

2. Pre-Installation Requirements

3. Installation Procedure

4. Removal Procedure

5. Cleaning Guidelines

6. Frequently Asked Questions (FAQs)

Package Contents

● 1 x Folding Popup Camper Trailer Cover

● 1 x Storage Bag

● 1 x Repair Patch

● 1 x Weighted Buckles Bag

Step-by-Step Installation

1. Identify the Front of the Cover - Locate the white tag labeled "FRONT" on the cover. In some cases, the tag may not say “front,” but it still marks the front of the cover. Roll the cover up and place it onto
The trailer, starts from the rear and rolling it toward the front.

2. Center the Cover - Ensure the cover is aligned with the center of the trailer. Once it is positioned, pull the cover down over one side of the trailer, then repeat this step on the other side.

3. Cover the Rear - Follow the same process for the rear of the trailer, pulling the cover down and making any necessary adjustments to ensure a good fit.

4. Secure the Cover - Once the cover is in position, secure the bottom and middle straps and buckles. Use the weighted buckle bag to toss the straps beneath the trailer for easy fastening.

5. Final Adjustments - Adjust the cover as needed for a perfect fit.
Removal Procedure To remove your Folding Popup Camper Trailer cover, simply reverse the installation steps:

● Unfasten the straps and buckles.

● Fold and roll the cover from front to back.

● Store the cover in the provided storage bag. 

Important: Ensure the cover is completely dry before storing it to prevent mildew.

Frequently Asked Questions (FAQs)

How do I measure my Folding Popup Camper?

● Length: Measure from the front to the rear of the camper, including the spare tire and ladder. Exclude the hitch and tongue.

● Height: Measure from the highest point of the roofline down to the outside frame. Do not include ground clearance, roof accessories, vents, or A/C units. If your camper has an A/C unit and your height measurement is within 4 inches of the cover’s size range, it is recommended to size up to accommodate the air conditioner.

How can I identify the front of the cover?

● Look for the white tag labeled "FRONT" on the cover. If it isn’t labeled, the tag still indicates the front of the cover.

How do I use the weighted buckle bag?

● Attach the strap to the buckle on the bag, fill it with rocks or sand, and use it to toss the straps underneath the camper for easy fastening.
How do I wash my cover?

● Hand Wash: Install the cover on your camper and rinse it with a hose. Use a cloth and multi-purpose cleaner for tougher spots, then rinse again. Air-dry or towel dry the cover.

● Machine Wash: Use gentle mode with cold water. Dilute 1/4 cup of Simple Green cleaner in 1 cup of water and add to the wash. Never use bleach or fabric softeners.